Hakko Electronics V8 series - Setting Procedure

HK Gothic and HK Times
A1-21
A1
Font
Setting Procedure
1. Font type setting (page A1-22 in this chapter)
Select [English/Western Europe HK Gothic] or [English/Western Europe HK Times] for [Font].
2. Font setting for individual functions in use (page A1-23 in this chapter)
Specify the number of points as a character size in property setting when setting a part, mode, or
text in drawing.
3. Manual font setting (page A1-25 in this chapter)
When automatic font setting is not valid for any function set in step 2, make a manual font setting.
4. Data transfer to the V series (page A1-27 in this chapter)
Transfer the screen data using the HK font to the V series.