64k- or 32k-color Type
A2-8
Flashing Function
3D parts can flash between different patterns: the ON pattern or pattern P3 ñ P128 and the OFF
pattern.
Setting Procedure
This section explains the procedure for setting a lamp that flashes while it is on.
The same procedure applies to switches.
1. Go to the [Lamp] dialog and open the [Style] tab window.
2. Select the tab of the pattern for flashing. Check [ Flash].
M0
ON
OFF
Display
Ex.) Lamp memory M0
For a flashing time setting, click [System Setting] → [Unit Setting] → [Blink/Flash].
To Next Page
Loading...