2.6 Screen Composition
2-41
2
Editor
[PLC Memory Transfer] Tab Window
When you mainly use PLC memory for the macro and also directly use PLC memory for macro
commands, a read to PLC memory occurs and as a result, the display speed is slowed.
To avoid this, copy memory necessary for each cycle to the internal memory and execute macro
commands in the internal memory. Through this process, speed down can be decreased.
Using these options, specify the copy source and the copy target for each screen.
This tab window is not available when [Universal Serial] or [Without PLC Connection] is selected for
PLC1 to PLC8 in the [Device Connection Setting] dialog.
To Next Page
Loading...