4.3 Drawing Methods
4-30
7. Drag the mouse from the start point to the end point.
8. When you stop dragging, a line is displayed. Click the mouse at the start point of the elliptical arc
or sector.
9. Move the cursor clockwise (portion to be erased) or counter-clockwise (portion to be drawn) along
the elliptical arc or sector, and click on the end point.
10. Clicking the mouse draws the elliptical arc or sector.
11. To reset the drawing setting, right-click or double-click the mouse. By dragging the mouse again
without resetting it, you can draw another elliptical arc or sector continuously.
: Start point
: End point
Clockwise
Counterclockwise
To Next Page
Loading...