128-color Type
A2-20
3. Find the desired part, which is with “I” (such as “3D-I”) in its comment field, in the switch parts list.
The list is changed with the arrow icon or selection from the pull-down menu.
Using a part with “II” in its comment field will issue a warning during error check, and the part will not be
colored correctly.
“II”: 64k-/32k-color type
“I”: 128-color type (V6-compatible)
In the [Parts List] window, you can see the images of switches turned on and off and in different
colors.
OFF images
ON images
Switch.
To Next Page
Loading...