Siemens SCALANCE XR-500 Configuration Manual

Configuration
3.2 Load and Save
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
108 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call up the command with the following parameters:
password {showfiles|filetype<filetype>[pw<password>]}
The parameters have the following meaning:
Parameter
Description
Values
showfiles
Shows the available files
-
filetype
Shows that the file type follows that will be loaded -
filetype
Name of the file type
max. 100 characters
pw
Keyword for the password
-
password
Password Enter the password for
the file.
Result
The password for the file is configured and activated.
Further notes
You disable the password with the no password command.
3.2.5.3
no password
Description
With this command, you disable the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
no password {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
Description
Values
showfiles
Shows the available files
-
filetype
Shows that the file type follows that will be loaded
-
filetype
Name of the file type
max. 100 characters

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English