Network protocols
7.4 DHCPv6 client (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
310 Configuration Manual, 11/2015, C79000-G8976-C252-10
show ipv6 dhcp
Description
This command shows the DHCPv6 configuration.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameter assignment:
show ipv6 dhcp
The configuration is displayed.
show ipv6 dhcp interface
Description
This command shows the DHCPv6 configuration and the DHCPv6 information that was
received from the DHCPv6 server.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
To Next Page
Loading...
Need help?
General