Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
72 Configuration Manual, 11/2015, C79000-G8976-C252-10
You are in the User EXEC mode.
The command prompt is as follows:
cli>
Call the command without parameters:
enable
You are prompted to enter the administrator password. After logging in successfully, you are
in the Privileged EXEC mode.
The command prompt is as follows:
cli#
With this command, you lock the console.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call the command without parameters:
lock
The console is locked. The system expects the entry of the password.
You cancel the lock by entering the Login password.
To Next Page
Loading...
Need help?
General