Introduction
1.2 What's new (CLI)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
29
What's new (CLI)
What's new as of version 5.1?
Below, you will find an overview of the most important function expansions:
● Configuration of IPv6 functionalities.
– Network protocols > DHCPv6 client (IPv6)
– Network protocols DHCPv6 Relay Agent (IPv6)
– Layer 3 functions > OSPFv3 (IPv6)
– Layer 3 functions > RIPng (IPv6)
● Security and authentication > user management
● Diagnostics > fiber monitoring
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
● SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
● On the Internet under the following address:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045
)
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. For more information about industrial security, visit
http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. For more information, visit http://support.automation.siemens.com.
To Next Page
Loading...
Need help?
General