Layer 2 management protocols
8.2 IGMP snooping
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
393
Call up the command with the following parameters:
show ip igmp snooping forwarding-database [Vlan<vlan id>]
The parameters have the following meaning:
Keyword for a VLAN connection
Number of the addressed VLAN 1 ... 4094
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
The multicast forwarding entries are displayed.
show ip igmp snooping statistics
Description
This command shows the statistical information about IGMP snooping for all or a selected
VLAN.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show ip igmp snooping statistics [Vlan<vlan id>]
The parameters have the following meaning:
Keyword for a VLAN connection
Number of the addressed VLAN 1 ... 4094
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
The statistical information is displayed.
To Next Page
Loading...
Need help?
General