Siemens SCALANCE XR-500

Load control
10.5 Service classes
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
669
Result
The assignment table for service classes is displayed.
10.5.1.2
show qos dscp-map
Description
This command shows assignment table for DSCP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos dscp-map
Result
The assignment table for DSCP is displayed.
10.5.1.3
show qos-trust-mode
Description
This command shows port by port the method according to which packets to be forwarded
are prioritized.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos-trust-mode