Siemens SCALANCE XR-500

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
82 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call up the command with the following parameters:
coordinates latitude <latitude>
The parameter has the following meaning:
Parameter
Description
Range of values / note
latitude
Input box for the latitude coordinate max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude "123
456"
Result
The latitude coordinate is created.
3.1.12.7
coordinates longitude
Description
With this command, you enter a longitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates longitude <longitude>
The parameter has the following meaning:
Parameter
Description
Range of values / note
longitude
Input box for the longitude coordinate max. 32 characters
To use spaces in the entry, enter
the longitude coordinate in
quotes: coordinates longitude
"123 456"
Result
The longitude coordinate is created.