Layer 3 functions
9.5 VRRPv3 (IPv4 / IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
571
show vrrp3 interface - vrid
Description
This command shows the settings of a virtual router.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show vrrp3
[
interface
{
vlan <VlanId(1-4094)>| <interface-type><interface-id>
}
<vrID(1-255)>
]
[{
brief|detail|statistics
}]
The parameters have the following meaning:
Keyword for a VLAN connection
Number of the addressed VLAN
Type or speed of the interface
Enter a valid interface
Slot no. and port no. of the interface.
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
-
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
The settings of the virtual router are displayed.
To Next Page
Loading...
Need help?
General