Network protocols
7.2 IPv6 protocol
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
282 Configuration Manual, 11/2015, C79000-G8976-C252-10
The IPv6 routing table is displayed.
You configure a static entry with the ipv6 route command.
show ipv6 route summary
Description
This command shows a summary of the IPv6 routes.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameter assignment:
show ipv6 route summary
The summary is displayed.
show ipv6 traffic
Description
This command shows the statistics for UDP and ICMPv6 for the corresponding interface.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
To Next Page
Loading...
Need help?
General