Siemens SCALANCE XR-500

SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
259
Network protocols
7
This part contains the sections that describe the commands for working with the various
network protocols.
7.1
IPv4 protocol
This section describes commands of the Internet Protocol (IP) version 4.
7.1.1
The "show" commands
This section describes commands with which you display various settings.
7.1.1.1
show ip route
Description
This command shows the routes currently being used.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#