Siemens SCALANCE XR-500

Network protocols
7.8 SMTP Client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
368 Configuration Manual, 11/2015, C79000-G8976-C252-10
7.8.1
The "show" commands
This section describes commands with which you display various settings.
7.8.1.1
show events smtp-server
Description
This command shows the configured e-mail servers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events smtp-server
Result
The configured e-mail servers are displayed.
7.8.1.2
show events sender email
Description
This command shows the configured e-mail sender address.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events sender email