Siemens SCALANCE XR-500

Network structures
6.4 Passive Listening
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
257
Further notes
You disable "passive listening" with the no passive-listening command.
You display the status of "passive listening" with the
show passive-listening command.
6.4.3
no passive-listening
Description
This command disables "passive listening".
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no passive-listening
Result
The "passive listening" function is disabled.
Further notes
You enable "passive listening" with the passive-listening command.
You display the status of "passive listening" with the
show passive-listening command.