Siemens SCALANCE XR-500

SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
649
Load control
10
This part contains the sections describing the functions for controlling and balancing network
load.
10.1
Rate control
This section describes commands for controlling and restricting the data transmission rate of
an interface.
10.1.1
The "show" commands
This section describes commands with which you display various settings.
10.1.1.1
show rate-limit output
Description
This command shows the packet rate for limiting the outgoing data stream of one or all
interfaces.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#