Siemens SCALANCE XR-500

Network protocols
7.2 IPv6 protocol
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
289
7.2.3.6
no ipv6 path mtu discover
Description
With this command, you disable the PMTU Discovery function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ipv6 path mtu discover
Result
The PMTU Discovery function is disabled.
Further notes
You enable the PMTU Discovery function with the command ipv6 path mtu discover.
You display the settings with the
show ipv6 pmtu command.
7.2.3.7
ipv6 route
Description
With this command, you configure a static entry in the IPv6 routing table.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#