Siemens SCALANCE XR-500

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
58 Configuration Manual, 11/2015, C79000-G8976-C252-10
3.1.1.2
show coordinates
Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show coordinates
Result
The system coordinates are displayed.
3.1.1.3
show device information
Description
This command shows information about the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show device information
Result
The information about the device is displayed.