Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
81
You enable automatic logout with the cli-console-timeout command.
You display the current timeout setting with the
show cli-console-timeout command.
coordinates height
Description
With this command, you enter a height coordinate.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
coordinates height <meter>
The parameter has the following meaning:
Input box for the height coordinate max. 32 characters
To use spaces in the entry, enter
the height coordinate in quotes:
coordinates height "123 456"
The height coordinate is created.
coordinates latitude
Description
With this command, you enter a latitude coordinate.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
To Next Page
Loading...
