Diagnostics
12.4 Port Mirroring
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
799
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Call the command without parameters:
monitor barrier enabled
Communication via the monitor port is disabled.
You enable the communication with the no monitor barrier enabled command.
You display the configuration settings with the
show monitor barrier command.
no monitor barrier enabled
Description
With this command, you enable the communication via the monitor port.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Call the command without parameters:
no monitor barrier enabled
Communication via the monitor port is enabled.
You disable the communication with the monitor barrier enabled command.
You display the configuration settings with the
show monitor barrier command.