SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
387
Layer 2 management protocols
In this part, you will find sections relating to the topics GARP, GMRP, GVRP, IGMP/MLD
snooping and IGMP/MLD querying.
This section describes commands of the following protocols:
● GARP - Generic Attribute Registration Protocol
● GMRP - GARP Multicast Registration Protocol
● GVRP - GARP VLAN Registration Protocol
This section describes commands with which you display various settings.
show forward-all
Description
With this command, you display the entries of the GMRP forward all table.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show forward-all
The entries of the GMRP forward all table are displayed.
To Next Page
Loading...
Need help?
General