Siemens SCALANCE XR-500 Configuration Manual

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
85
3.1.12.11
username
Description
With this command, you change the password of the factory set default users "user" and
"
admin".
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
username {user|admin} password <passwd>
The parameters have the following meaning:
Parameter
Description
Range of values / note
user
User name of the default user with
read access to the configuration
data.
-
admin
User name of the default user with
read and write access to the con-
figuration data.
-
password
Keyword for a password
-
passwd
Value for the password Enter the password.
The password must meet the following
password policies:
• Password length: at least 8 characters
• at least 1 uppercase letter
• at least 1 special character
• at least 1 number
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English