Siemens SCALANCE XR-500

Security and authentication
11.1 User management
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
677
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-groups
Result
The links are shown.
Further notes
You link a group with a role with the user-group command.
You delete a link with the
no user-group command.
11.1.1.4
show users
Description
This command shows the logged-in CLI users.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show users
Result
The logged-in CLI users are displayed.