Siemens SCALANCE XR-500 Configuration Manual

Network structures
6.3 Spanning Tree
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
218 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call up the command with the following parameters:
show spanning-tree root
[{address|cost|forward-time|id|max-age|port|priority|detail}]
The parameters have the following meaning:
Parameter
Description
address
Shows the MAC address of the root bridge
cost
Shows the costs of the connection to the root bridge.
forward-time
Shows the time that the bridge is in the listening mode when changing from
the blocking mode to the learning mode
id
Shows the ID of the root bridge
max-age
Shows the maximum age of the data packet after which it is deleted
port
Shows the interface via which the spanning tree is set up
priority
Shows the priority of the bridge
detail
Shows detailed information about the root bridge
Result
The settings of the root bridge for the spanning tree function are displayed.
6.3.1.9
show spanning-tree mst configuration
Description
This command shows various settings for an instance of the Multiple Spanning Tree
Protocol.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show spanning-tree mst configuration
Result
The settings of an instance of the Multiple Spanning Tree protocol are displayed.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English