Siemens SCALANCE XR-500

Security and authentication
11.2 RADIUS client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
694 Configuration Manual, 11/2015, C79000-G8976-C252-10
Further notes
You can display the status of this function and other information with the show device
information
command.
11.2.2.4
radius-server
Description
With this command, you configure a RADIUS server entry on the RADIUS client.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#