Siemens SCALANCE XR-500

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
84 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call up the command with the following parameters:
system location <string>
The parameter has the following meaning:
Parameter
Description
Range of values / note
string
Input box for the location information
max. 255 characters
Result
The location information is created in the system.
3.1.12.10
system name
Description
This command, you enter a name for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system name <string>
The parameter has the following meaning:
Parameter
Description
Range of values / note
string
Input box for the name max. 255 characters
Result
The name is created in the system.