Siemens SCALANCE XR-500

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
71
Further notes
You exit the Global configuration mode with the end command.
3.1.5
disable
With the commands enable and disable you temporarily change the function rights of the
logged in user, the login data remains unchanged.
Description
With this command, you close the Privileged EXEC mode.
You are then in the User EXEC mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
disable
Result
You are in the User EXEC mode.
The command prompt is as follows:
cli>
3.1.6
enable
With the commands enable and disable you temporarily change the function rights of the
logged in user, the login data remains unchanged.
Description
With this command, you change to the Privileged EXEC mode.