Diagnostics
12.6 Syslog Client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
817
Call up the command with the following parameters:
no rmon collection history <index(1-52)>
The parameter has the following meaning:
The data recording is ended.
With the commands in this section, the following settings are configured:
● Transfer of the messages to the Syslog server
● Local buffering and storage of messages
● Receipt and forwarding of messages from other devices (relay mode)
This section describes commands with which you display various settings.
show events syslogserver
Description
This command shows the entries of the configured Syslog server.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show events syslogserver
To Next Page
Loading...
Need help?
General