Siemens SCALANCE XR-500 Configuration Manual

Network protocols
7.7 SNMP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
352 Configuration Manual, 11/2015, C79000-G8976-C252-10
Further notes
You configure the setting with the snmp access command.
You display the configured SNMP groups with the
show snmp group command.
You display the access configurations for SNMP groups with the
show snmp group access
command.
You display the configured SNMP tree views with the
show snmp viewtree command.
7.7.2.6
snmp community index
Description
With this command, you configure the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp community index <CommunityIndex> name <CommunityName>
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter
Description
Range of values / note
CommunityIndex
Index of the community
max. 32 characters
name
Keyword for the name of the communi-
ty
-
CommunityName
Name of the community
max. 32 characters
security
Keyword for the security name
-
SecurityName
Security name
max. 32 characters
context
Keyword for the context name
-
Name
Context name
max. 32 characters
Storage type specifies whether the settings remain
following a restart
•
volatile (volatile):
The settings are lost after a
restart
•
nonvolatile (non-volatile):
The settings are retained after
a restart
If optional parameters are not specified when configuring a community, the default values
apply.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English