System time
5.1 System time setting
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
148 Configuration Manual, 11/2015, C79000-G8976-C252-10
Call up the command with the following parameters:
time set hh:mm:ss <day (1-31)>
{january|february|march|april|may|june|july|august|september|october|november|decembe
r}
<year (2000 - 2035)>
The parameters have the following meaning:
Time of day Hour, minute, second each sepa-
- Month january, february, march, april,
may, june, july, august, septem-
ber, october, november, decem-
The system time is set.
You display the settings for the system clock with the show time command.
time dst date
Description
With this command, you configure the start and end of daylight saving time.
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
To Next Page
Loading...
Need help?
General