Siemens SCALANCE XR-500

Network protocols
7.7 SNMP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
344 Configuration Manual, 11/2015, C79000-G8976-C252-10
7.7.1.7
show snmp inform statistics
Description
This command shows the statistics of the Inform Messages.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp inform statistics
Result
The statistics of the Inform Messages are displayed.
7.7.1.8
show snmp notif
Description
With this command, you display the configured SNMP notification types.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp notif
Result
The configured SNMP notification types are displayed.