Functions specific to SCALANCE
4.3 Panel button
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
138 Configuration Manual, 11/2015, C79000-G8976-C252-10
no web-session-timeout
Description
With this command, you disable the automatic logoff.
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Call the command without parameters:
no web-session-timeout
Automatic logoff is disabled.
You enable automatic logoff with the web-session-timeout command.
You display the current timeout setting with the
show web-session-timeout command.
This section describes the commands relevant for working with the Panel Button function.
Commands in the global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
configure terminal command to change to this mode.
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
end or exit command and are then in the
Privileged EXEC mode again.
To Next Page
Loading...
Need help?
General