Description
2.7 General CLI commands
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
53
Completion of command entries
Description
The command interpreter of the Command Line Interface supports you when you enter
commands.
As soon as the first characters of the command have been entered in the input line, the
system can complete the entry as long as the character string is unambiguous.
This can be repeated after entering further characters.
Enter the first characters of the command.
Press the tab key.
The command interpreter completes the input as long as the command is unambiguous.
If you enter a character string that cannot be completed to form a command, an error
message is displayed.
● The command is not unique:
% Ambiguous Command
● The command is unknown:
% Invalid Command
● The command is incomplete:
% Incomplete command
If the entry is not yet complete, enter further characters.
With
?, you obtain a list of the possible commands.
Repeat this if necessary until the command is complete and can execute.
Abbreviated notation of commands
Description
The command interpreter of the Command Line Interface also detects commands if only the
first character of the command or its parts is entered.
This is only possible if all the parts of the abbreviated input can be assigned to exactly one
command or to the parts of the command.
The show event config command can be replaced by the expression sh e c.
To Next Page
Loading...
Need help?
General