Siemens SCALANCE XR-500

Network protocols
7.11 ARP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
378 Configuration Manual, 11/2015, C79000-G8976-C252-10
Result
The SSL server certificate is displayed.
7.11
ARP
This section describes commands of the Address Resolution Protocol (ARP).
7.11.1
The "show" commands
This section describes commands with which you display various settings.
7.11.1.1
show ip arp
Description
With this command, you display the IP ARP table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#