Network structures
6.1 VLAN
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
199
frames are given a tag with the VLAN ID specified there. Received frames with a VLAN
ID are forwarded according to the VLAN ID. With outgoing frames, the tag with the VLAN
ID is removed.
● Forbidden Ports
This interface is not used for communication in a VLAN.
The "tagged port" and "untagged port" you specify with this command are used for outgoing
data traffic.
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Call up the command with the following parameters:
ports
(
[<interface-type><0/a-b,0/c,...>]
[<interface-type><0/a-b,0/c,...>]
[port-channel<a,b,c-d>]
)
[
untagged<interface-type> <0/a-b,0/c,...>
(
[<interface-type><0/a-b,0/c,...>]
[port-channel <a,b,c-d>]
[all]
)
]
[
forbidden<interface-type><0/a-b,0/c,...>
[<interface-type><0/a-b,0/c,...>]
[portchannel<a,b,c-d>]
]
[name<vlan-name>]
To Next Page
Loading...
Need help?
General