Siemens SCALANCE XR-500 Configuration Manual

Network protocols
7.7 SNMP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
361
The parameters have the following meaning:
Parameter
Description
Range of values / note
ParamName
Name of the SNMP parameter
max. 32 characters
user
Keyword for the user name -
UserName
Value for the user name
max. 32 characters
security-model
Specifies which SNMP version is used.
With SNMPv3 a security level (authen-
tication, encryption) can also be con-
figured.
• SNMP version
–
v1
–
v2c
– v3
• Security level for v3
–
auth
Authentication enabled /
no encryption enabled
–
noauth
No authentication enabled,
no encryption enabled
–
priv
Authentication enabled /
encryption enabled
message-processing
Specifies which SNMP version is used
for processing the messages and
whether the settings remain following a
restart.
• SNMP version
–
v1
– v2c
–
v3
• Settings after the restart
–
volatile (volatile):
The settings are lost after
a restart
– nonvolatile (non-
volatile):
The settings are retained
after a restart
Keywords need to be specified.
If optional parameters are not specified when configuring, the default values apply.
Result
The SNMP target parameters are configured.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English