Siemens SCALANCE XR-500 Configuration Manual

Layer 3 functions
9.3 OSPFv3 (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
527
Syntax
Call up the command with the following parameters:
redist-config <IPv6-Prefix> <Prefix-Length>
[metric-value <metric>]
[metrictype {
asExttype1 | asExttype2
}] [tag <tag-value>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
IPv6-Prefix
IPv6 address
Enter a valid IPv6 address
Prefix-Length
Number of bits belonging to the prefix
(from left to right)
1 ... 128 bits
128: The node (host) itself
metric-value
Keyword for the metric of the route
-
metric
Metric 1 ... 16777215
metrictype
Keyword for the connection costs
-
asExttype1
External and internal costs
-
asExttype2
External costs
-
tag
Keyword for tag:
-
tag-value
Value that is assigned to the aggregated
routes.
1 ... 65535
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 39)".
Result
The information for the route is specified.
Further notes
You enable the ASBR router with the ASBR Router command.
You enable OSPFv3 routing with the
ipv6 router ospf command.
You enable the distribution of the routes with the
redistribute command.
You delete the information with the
no redist-config command.
You display the setting with the
show ipv6 ospf command.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English