Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
810 Configuration Manual, 11/2015, C79000-G8976-C252-10
Call up the command with the following parameters:
rmon alarm <alarm-number><mib-object-id(255)>
<sample-interval-time(1-65535)>
{absolute|delta}
rising-threshold<value(0-2147483647)>[risingevent-number(1-65535)]
falling-threshold<value(0-2147483647)>[fallingevent-number(1-65535)]
[owner<ownername(127)>]
The parameters have the following meaning:
Name of the MIB variable max. 255 characters
Interval for the check [s] 1 ... 65535
The current absolute value of the moni-
-
The difference between the current and
the previous value of the monitored
-
Keyword for threshold value for rising
-
Keyword for threshold value for falling
-
User to which the alarm is assigned
If you do not select a parameter from the parameter list, the events for high and low
threshold values are assigned the lowest event number available in the event table.
Note
MIB variables that can be monitored
With the RMON function, only MIB variables of the
Ethernet interfaces can be monitored.
Note
Magnitude of the threshold values
The threshold value for falling or low variable values should be less than the threshold value
for rising or high variable values.
To Next Page
Loading...
Need help?
General