3.8 Useful Functions for Screen Editing
3-95
3
Screen Editing
3.8 Useful Functions for Screen Editing
[Edit] Menu
The [Edit] menu provides the following functions:
Edit Content Refer to:
Undo Cancels actions that you performed. −
Redo Becomes active when [Undo] is performed. This
command restores the screen to the state
before the execution of [Undo].
−
Cut Cuts the selected item and moves it to the
clipboard.
−
Copy Copies the selected item to the clipboard. −
Paste Pastes the item in the clipboard to the screen. −
Paste to the Selected Screen − page 3-98
Undo Paste to Selected Screen − page 3-98
Delete Deletes the selected item. Select a part or a
graphic (or parts or graphics) to be deleted with
handles, and click this command.
−
Multiple Copy − page 3-99
Group Groups the selected items. Select multiple
items at the same time and click this command.
To cancel, select the grouped items and click
[Ungroup].
−
Order Offers four sub-menu items [Bring to Front],
[Send to Back], [Bring to Top], and [Send to
Bottom].
Your selected item on the screen is moved
according to the selection from the four.
−
Place − page 3-102
Arrangement (Equal) − page 3-104
Put All in Same Size − page 3-105
Rotation/Reverse Rotation Offers four sub-menu items [Rotate 90 degrees
CCW], [Rotate 90 degrees CW], [Horizontal
Flip], and [Vertical Flip].
Your selected item is rotated or flipped
according to the selection from the four.
(This command applies to only graphics, not
text).
−
Vertex Edit − page 4-17
Change Part − page 3-106
Link − page 3-61
Detail Setting Brings up the item dialog for the selected item.
Select an item and click this command.
−
Select Environment − page 3-112
Select All Selects all items placed on the screen. −
To Next Page
Loading...