4.3 Drawing Methods
4-28
6. Drag from the center to the desired radius.
7. When you stop dragging, a line is displayed. Click the mouse at the start point of the elliptical arc
or sector.
8. Move the cursor along the arc to the end point of the arc. The section drawn counter-clockwise
remains as an arc.
9. Clicking the mouse draws the elliptical arc or sector.
10. To reset the drawing setting, right-click or double-click the mouse. By dragging the mouse again
without resetting it, you can draw another elliptical arc or sector continuously.
Drawing method: [Elliptical Arc (Edge)]
1. Click the ā ā mark on the right of the [Frame Type] icon on the toolbar.
Select the desired frame type from the list displayed. ([With Frame (Paint)] is selected as an
example.)
2. Likewise, select a line style from the [Line Type] icon and a frame color from the [Line Color/Frame
Color] icon respectively.
: Start point
: End point
Clockwise
Counterclockwise
To Next Page
Loading...