Send documentation comments to mdsfeedback-doc@cisco.com
4-107
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
code-page
code-page
Use the code-page command to configure the EBCDIC format. To disable the configuration or to revert
to factory defaults, use the no form of the command.
code-page brazil | france | international-5 | italy | japan | spain-latinamerica | uk | us-canada
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines This is an optional configuration. If you are not sure of the EBCDIC format to be used, we recommend
retaining the us-canada (default) option.
Examples The following example configures the italy EBCDIC format.
switch(config)# ficon vsan 2
switch(config-ficon)# code-page italy
The following example reverts to the factory default of using the us-canada EBCDIC format.
switch(config-ficon)# no code-page
Related Commands
Command Description
show sme cluster Displays information about the Cisco SME cluster
code-page Configures code page on a FICON-enabled VSAN
brazil Configures the brazil EBCDIC format.
france Configures the france EBCDIC format.
international-5 Configures the international-5 EBCDIC format.
italy Configures the italy EBCDIC format.
japan Configures the japan EBCDIC format.
spain-latinamerica Configures the spain-latinamerica EBCDIC format.
uk Configures the uk EBCDIC format.
us-canada Configures the us-canada EBCDIC format.
Release Modification
1.3(1) This command was introduced.
To Next Page
Loading...
Need help?
General