Send documentation comments to mdsfeedback-doc@cisco.com
8-23
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcdomain distribute
fcdomain distribute
To enable fabric distribution using Cisco Fabric Services (CFS), use the fcdomain distribute command.
To disable fabric distribution using CFS, us the no form of the command.
fcdomain distribute
no fcdomain distribute
Syntax Description This command has no arguments or keywords
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example enables fabric distribution using CFS.
switch# config terminal
switch(config)# fcdomain distribute
The following example disables fabric distribution using CFS.
switch(config)# no fcdomain distribute
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
fcdomain Configures Fibre Channel domain features.
show fcdomain Displays global information about the FC domain configurations.
To Next Page
Loading...
Need help?
General