Send documentation comments to mdsfeedback-doc@cisco.com
22-358
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show tacacs+
show tacacs+
To display the TACACS+ Cisco Fabric Services (CFS) distribution status and other details, use the show
tacacs+ command.
show tacacs+ {distribution status | pending | pending-diff}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to display the TACACS+ distribution status.
switch# show tacacs+ distribution status
session ongoing: no
session db: does not exist
merge protocol status: merge activation done
last operation: none
last operation status: none
Related Commands
distribution status Displays the status of the TACACS+ CFS distribution.
pending Displays the pending configuration that is not yet applied.
pending-diff Displays the difference between the active configuration and the pending
configuration.
Release Modification
2.0(x) This command was introduced.
Command Description
tacacs+ enable Enables TACACS+.
tacacs+ distribute Initiates TACACS+ configuration distribution.
To Next Page
Loading...
Need help?
General