Send documentation comments to mdsfeedback-doc@cisco.com
6-72
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug ivr
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug ivr all command is issued:
switch# debug ivr all
2005 Mar 10 01:27:27 ivr: fu_fsm_execute_all: match_msg_id(0), log_already_open(0)
2005 Mar 10 01:27:27 ivr: fu_fsm_execute_all: null fsm_event_list
2005 Mar 10 01:27:27 ivr: fu_fsm_engine_post_event_processing: mts msg
MTS_OPC_DEBUG_WRAP_MSG(msg_id 6774251) dropped
Related Commands
zone-fsm Enables debugging of IVR zone FSM.
zone-fsm-detail Enables debugging of IVR zone FSM detail.
Release Modification
2.1(1) This command was introduced.
3.0(1) • Added the ficon and ficon-detail options.
• Added the pfcid and pfcid-detail options.
Command Description
no debug all Disables all debugging.
show ivr Displays IVR configurations.
To Next Page
Loading...
Need help?
General