Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
21-91
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system hap-reset
system hap-reset
To configure the HA reset policy, use the system hap-reset command in EXEC mode. Use the no form
of this command to disable this feature.
system hap-reset
system no hap-reset
Syntax Description This command has no arguments or keywords.
Defaults Enabled.
Command Modes EXEC mode.
Command History
Usage Guidelines You can disable the HA policy supervisor reset feature (enabled by default) for debugging and
troubleshooting purposes.
Examples The following example enables the supervisor reset HA policy.
switch# system hap-reset
Release Modification
1.0(2) This command was introduced.