Send documentation comments to mdsfeedback-doc@cisco.com
22-29
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cimserver logs
show cimserver logs
To display the cimserver logs, use the show cimserver logs command.
show cimserver logs
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following example displays the cimserver logs.
switch# show cimserver logs
02/07/2008-16:38:14 INFO cimserver: Sent response to: localhost
02/07/2008-16:38:26 INFO cimserver: Received request from: 10.77.91.110
02/07/2008-16:38:27 INFO cimserver: Sent response to: 10.77.91.110
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
cimserver loglevel Enters cimsever loglevel filters.
To Next Page
Loading...
Need help?
General