Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-268
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show npv internal info
Statistics:
flogi retry count : 113
ns registration retry count : 0
number of flogis accepted: 0
login failures out of ids: 0
other login failures : 0
timed out login_failures : 0
pending queue size : 0
FLOGIs on this interface :
Interface Information:
ifindex: fc1/5, VSAN: 1, internal FLOGI fcid: 0x000000
FSM current state: NPIVP_EXT_IF_ST_PREINIT_DONE
fabric pwwn: 00:00:00:00:00:00:00:00, fabric nwwn: 00:00:00:00:00:00:00:00
my pwwn: 00:00:00:00:00:00:00:00, my nwwn: 00:00:00:00:00:00:00:00
Port Parameters:
Rx B2B Credits: 0, Multiplier: 0, Buff Size: 0
Tx B2B Credits: 0, Multiplier: 0, Buff Size: 0, bbscn: 0
bbscn_capable: FALSE bbscn_max: 0, port_bbscn: 0
Timer & Retry Information:
Busy Timer (1), id: 00, active: FALSE time remaining: 0
Fail Retry Timer (7), id: 00, active: FALSE time remaining: 0
FDISC Response Timer (2), id: 00, active: FALSE time remaining: 0
Error Clear Timer (6), id: 71, active: TRUE time remaining: 433
Statistics:
flogi retry count : 0
ns registration retry count : 0
number of flogis accepted: 0
login failures out of ids: 0
other login failures : 0
timed out login_failures : 0
pending queue size : 0
FLOGIs on this interface :
Server Interface Info:
======================
Interface Information:
ifindex: fc1/4, VSAN: 1, NPIV enable: FALSE, lcp init done: FALSE
Selected External Interface:
FSM current state: NPIVP_SVR_IF_ST_WAITING_EXTERNAL_INTERFACE
Port Parameters:
rxbbcredit: 0 rxbufsize: 0
txbbcredit: 0 txbufsize: 0 txbbscn: 0
bbscn_capable: FALSE bbscn_max: 0, port_bbscn: 0
Statistics:
number of FLOGIs: 0
Related Commands Command Description
debug npv Enables debugging NPV configurations.
show debug npv Displays the NPV debug commands configured on the switch.