Send documentation comments to mdsfeedback-doc@cisco.com
16-13
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
ntp abort
ntp abort
To discard the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in
progress, use the ntp abort command in configuration mode.
ntp abort
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to configure NTP CFS distribution session in progress.
switch# config terminal
switch(config)# ntp abort
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.
To Next Page
Loading...
Need help?
General